Double Sided Tape Products

Assembly instructions

Step 0: Material Prep

Before assembling, make sure that you have all of the required materials. Attached below is the required list of materials for products that use adhesive tape:

  1. 52mm gauge bracket
  2. Heavy-duty double-sided tape
  3. Cleaning agent

Step 1: Surface Prep

Find the surface you plan to use and make sure the surface is completely clean for maximum adhesion. 

Step 2: Tape Appliance

Apply the tape to the bottom of the gauge bracket. Measure and cut individual strips to length* and carefully attach them to the bottom of the gauge bracket. If possible, let the tape sit for a couple of hours to make it easier to remove the film on the second side of the tape.

Step 3: Bracket to Dash Appliance

Apply the bracket to the dashboard. Wait at least 24 hours before adding gauge(s) for 90% maximum adhesion*

Step 4: Insert Gauge to Bracket

Insert your gauge(s) into the bracket. The gauge bracket is designed to hold gauges through friction without external support, but pockets are included for extra support if needed.

Step 5: Wire gauge

Wire your gauge(s) 

Reference

Recommended products:

Double Sided Tape: 3M VHB Tape 0.39" x 10'*

Cleaning agent: 99% Isopropyl Alcohol, IPA wipes

Cut-Lengths: 

  • Single Short - 0.75"
  • Single Long - 2.2"
  • Single Slim - 1.8"
  • Double - 4.2"
  • Triple - 7.4"

Tape Adhesion Graph* -

*We are not endorsed by 3M or its subsidiaries